So you bought your brand new laptop which is equipped with all the latest features like Bluetooth, Wi-if, etc. That's great! The configuration serves you more than what you need and above all the laptop looks so cute. The size of the laptop makes it so handy, the keypad comes in your favorite color and everything looks so nice. You started working on your laptop and Gosh! There is a power-cut. But your laptop keeps on working by automatically switching itself to the plugged-in battery resource. You are happy. However, you want to check whether the battery is full or not by pointing your cursor to the battery icon. It is showing 99%. Good! But what you need to do to keep your battery showing the same storage levels even after two years? Read further to know the solution.

The basic rule of getting a replacement battery is that it should have the same voltage as the original. An 18V drill cannot run on a 12V battery. It can only run on a 18V battery. The other thing is that the physical packaging of a battery can be different from company to company. A 12V Ryobi battery may not fit into a 12V Makita cordless drill unless the battery has the right physical dimensions. So make sure the replacement battery looks the same as the old one before you order it. Also, if you are looking for a replacement battery of the same voltage rating and by the same company, know that battery technology is changing rapidly. An 18V lithium-ion battery has a different physical packaging than a NiCad 18V battery.

Why is this important? If you have a relatively new PC the only problem you will get are error messages relating to the clock on start up. No big deal. If your PC is older then a low battery could be a nightmare. I had a PC which once cobalt mine every few months refused to boot. Rather than take the PC in for repair or start replacing parts myself the first thing I did was look at the BIOS settings. It was soon obvious that the BIOS settings were corrupt (wrong bus speed). I put a volt meter on the battery and sure enough it was reading 2.2 volts.

Once charging is complete unplug it. Do not leave it connected to the power. Even though it is charging no more, it can heat up your battery and decrease the battery life.

When you store it, make sure the temperature is not too high nor too low. Don't freeze it and storing the unit in a hot car or near the radiator is a bad idea as well. Use a sealable bag, charge the Lithium battery stocks to about 50% and put it into the fridge between 0 and 5C.

Apple has an official out-of-warranty battery replacement program Lithium mines Ontario for shipping in the United States(see Europe and copyright pricing The policy requires that you send in your iPod any model and Apple will change the battery and ship it to you for plus handling and shipping. Technically, Apple in reality exchanges your whole unit with an equivalent original model or factory-refurbished model in a brand new cover, with its own 90-day service warranty; if it was previously engraved by Apple, it will be engraved again.

If your drill didn't come with a second battery (my cordless Bosch drill did) than you will either have to purchase a second battery or take a short break until your battery is ready.

So, there you have it; some simple suggestions on how to extend the life of your cell phone battery. Although it's not a going to double or triple the life of your battery, following these guidelines will make it much easier on you and cause less aggravation in the long run.